VIA-TTL

VTG Interface Adapter VIA–TTL for VTG-3116 and 3112 digital models

Digital TTL Interface Adapter for Flat Panel Displays
The VIA-TTL, VTG Interface Adapter, is a high-speed digital interface for buffering, voltage level adjusting and connecting 24 or 48 bits of TTL data clock & sync signals to different parallel interface and pin-configurations, back lightning and display electronics.

Total Flexibility for all your needs
Every VIA comes equipped with a CD containing appropriate .vtm file for driving the VIA Interface parameters and their preset values are specified in .vtm file

The VIA Advantage

• Full ATE support.
• DDC Support.
• Lower Cost, when standards change all you need to change is the adapter, not a complete generator!

Full Software Support

• Interface control and adjusting is software controlled via the WinVTG User Interface.
• Drivers for Win95, Win 98, 2000, XP and NT4, 16 and 32 bit DLLs
  

Download the VIA-TTL PDF here

DIA-DVI/TMDS

VTG Interface Adapter DIA-DVI /TMDS VTG-3116 and 3112 digital models

Digital TMDS Interface Adapter for Flat Panel Displays
The DIA DVI / TMDS, VTG Interface Adapter, is a high-speed digital interface for Single 165MHz and Dual link 330MHz DVI / TMDS applications. It is DVI-I compatible which gives you analog RGB output also on the cross-point portion of the DVI-i connector.

Total Flexibility for all your needs
Every DIA comes equipped with a CD containing appropriate .vtm file for driving the VIA Interface parameters and their preset values are specified in .vtm file

The DIA Advantage

• Full ATE support.
• DDC Support.
• Lower Cost, when standards change all you need to change is the adapter, not a complete generator!

Full Software Support

• Interface control and adjusting is software controlled via the WinVTG User Interface.
• Drivers for Win95, Win 98, 2000, XP and NT4, 16 and 32 bit DLLs

Download the DIA-DVI PDF here

VIA-LVDS

VTG Interface Adapter VIA–LVDS

Digital Interface Adapters for Flat Panel Displays
The VIA-LVDS, VTG Interface Adapter, is a high-speed digital display interface for converting 24 or 48 bits of parallel pixel-data, clock & sync signals to LVDS differential serial signal for LDI and open LDI output interfaces.

Total Flexibility for all your needs
Every VIA comes equipped with CD, containing appropriate .vtm file for driving the VIA Interface parameters and their preset values are specified in .vtm file.

The VIA Advantage

• Full ATE support.
• DDC Support.
• Lower Cost, when standards change all you need to change is the adapter, not a complete generator!

Full Software Support

• Interface control and adjusting is software controlled via the Windows User Interface.
• Drivers for Win95, Win98, 2000, XP and NT4, 16 and 32 bit DLLs

CVA-2

Composite video output adapter

CVA-2 is an adapter that converts the analog RGB from either VTG 30xx series into composite video and S-video formats. The selection between PAL and NTSC standards is made by a manual switch.

The input connector of CVA-2 is pin compatible with the 25-pin D-sub output connector of analog VTG boards. CVA-2 is powered through this connector so no extra batteries or power adapters are needed.

The dimensions of CVA-2, including the connectors are: 57 x 30 x 127 mm (width, height, length)

Output connectors: BNC for composite video, S-video connector