VTG-5225 DP

Unigraf VTG-5225 DP video test generator was the first solution for testing DisplayPort™  Sink devices. It implements the full DisplayPort™  Source specifications for deep color and it supports display modes up to WQXGA resolution. The optional Link Layer CTS and HDCP CTS software complies with the Link Layer Compliance Test version 1.1, D11 functionalities. The advance diagnostic CTS test results are easy to read and guide you through each test fast and accurately.  The reports can be saved in HTML format and stored for record keeping.

Supports present and future needs

In addition to the outstanding output signal performance, the VTG-5225 DP provides superior flexibility by storing industry standard timing files, predefined test patterns and custom made bitmaps internally. These features allow the VTG-5225 DP to support both present and future high resolution panel and display testing requirements.

Specifications:

DisplayPort™

DisplayPort™ input connector
Genesis gm60028 transmitter
Supports 1, 2 or 4 lane configurations
Supports all four levels of pre-emphasis and voltage swing
Supports high and reduced bit rates
Supported Video Formats
All VESA DMT/CVT formats up to WQXGA 60 Hz (2560 x 1600)
All CEA 861-D formats
Custom formats including 1366 x 768 up to 270 Mpix/s pixel rate
Deep Color 8, 10 or 12 bit color depth, true color
RGB or YCbCr 444 or YCrCb 422

DVI

Dual-Link DVI
165 Mpix/s single link maximum 330 Mpix/s dual link maximum
True Color 8 bits per component (24 bits RGB)
Connector DVI-I with TMDS and RGB / YPbPr

Analog Video

VGA RGB / YPbPr
300 Mpix/s maximum
Sync HS (±), VS (±), C-Sync, SOG
True Color 10 bits per component (30 bits RGB)
HDTV RGB / YPbPr (filtered)300 Mpix/s maximum
Sync Tri-level sync on Green Separate HSync (±) and VSync (±)
True Color 10 bits per component (30 bits per RGB / YPbPr)

Video Frame Buffer:User accessible memory 64 Mpixels36 bits/pixel for storing patterns and bitmaps, allowing frame-to-frame and scrolling animation etc.
Audio: Optical S/PDIF input for external audio source
System Requirements: Windows™ XP
Power: +12 VDC / 4 A (External AC/DC adapter included)
Dimensions: 72 x 211 x 342 mm
Data Communication: USB, USB 2.0 compatible
SW Support: WinVTG3, User Interface Windows DLL software library Visual Basic and C++ sample programs

Download the VTG-5225 PDF here